Copper Bonded Rod-Externally Threaded

Material: M.S.Steel
Finish: Copper

Earthing/Grounding system, the Copper Bonded Rod provides the physical connection to the earth and is the instrument used to dissipate current into it. There are two main types of electrodes.

OUR COPPER BONDED ROD FEATURE

• Perfectly bonded Copper Bonded Grounding Rod will lost longer, drive easier and will not crack.
• In Copper Bonded Rod, Copper purity is 99.95%.
• The Copper Bonded Rods is fully vcoered with copper cladding without any cracks, holes, cavities.
• Threads are rolled by roll threading process, which ensures that when copper covers is maintained, at the root of the thread, Roll thread gives greater strength than cut thread.
• Magnetic conducting rate is low. Thus reducing the lightning induction.
• Good tensile strength in Copper Bonded Rod, over 600N/mm2.
• Resist corrosion better than galvanised rods allowing for a 30-year service life in most soils
• Corrosion resistance while providing the lowest resistance to ground.
• Preventing exposure of the steel core to soil and moisture. The Copper Bonded Rod is suitably treated to prevent oxidation of copper bonding. The Copper Bonded Rod is capable of being bent 90 Degrees at a maximum radius of 100m with no copper fracture and with no ill effect on bond between the steel and the copper cladding.
• Thread rolling process raises the surface of the rod, so teat Thread dia. (T) is greater than Shank dia. (S). Copper layer is over 0.254mm (copper layer thickness can be on request, such as 0.10mm, 0.25mm, 0.100mm, 0.150mm, 0.200mm, 0.254mm etc. upto 0.850mm). Please note that 0.254mm is also known as 254 micron or 0.10mm as 100 micron but if our customer request for Standard Micron i.e 15-25 micron, than we also manufacture in standard micron).

---